View BAT41KFILM_8955790.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

october 2009 doc id 12633 rev 2 1/12 12 bat41 low capacitance small signal schottky diodes features low leakage current losses negligible switching losses low forward and reverse recovery times extremely fast switching surface mount device low capacitance diode description the bat41 series uses 100 v schottky barrier diodes packaged in sod-123, sod-323, sod-523, sot-323, or sot-666. this series is specially suited for switching mode with low i r losses table 1. device summary symbol value i f 200 ma v rrm 100 v c(typ) 3 pf t j (max) 150 c sod-123 sod-323 sod-523 sot-666 bat41zfilm (single) bat41jfilm (single) BAT41KFILM (single) bat41wfilm (single) bat41cwfilm (common cathode) bat41awfilm (common anode) bat41swfilm (series) bat41-07p6film (2 parallel diodes) bat41-09p6film (2 opposite diodes) sot-323 configurations in top view www.st.com
characteristics bat41 2/12 doc id 12633 rev 2 1 characteristics table 2. absolute ratings (limiting values at t j = 25 c, unless otherwise specified) symbol parameter value unit v rrm repetitive peak reverse voltage 100 v i f continuous forward current 200 ma i fsm surge non repetitive forward current t p = 10 ms sinusoidal 1 a t stg storage temperature range -65 to +150 c t j maximum operating junction temperature 150 c table 3. thermal parameters symbol parameter value unit r th(j-a) junction to ambient (1) 1. epoxy printed ci rcuit board with recommended pad layout sod-123 500 c/w sot-323, sod-323 550 sod-523, sot-666 600 table 4. static electrical characteristics symbol parameter test conditions min. typ. max. unit i r (1) 1. pulse test: t p = 5 ms, < 2 % reverse leakage current t j = 25 c v r = 50 v 0.1 a t j = 100 c 20 v f (2) 2. pulse test: t p = 380 s, < 2 % forward voltage drop t j = 25 c i f = 1 ma 400 450 mv i f = 200 ma 1000 table 5. dynamic characteristics symbol parameter test conditions min. typ. max. unit c diode capacitance v r = 1 v, f = 1 mhz 3 10 pf
bat41 characteristics doc id 12633 rev 2 3/12 figure 1. average forward power dissipation versus average forward current figure 2. average forward current versus ambient temperature ( = 1) 0.00 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20 0.22 0.00 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20 0.22 0.24 p(w) t =tp/t tp = 1 = 0.05 i (a) f(av) = 0.5 = 0.2 = 0.1 0.00 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20 0.22 0 25 50 75 100 125 150 i (a) f(av) t (c) amb t =tp/t tp figure 3. reverse leakage current versus reverse applied voltage (typical values) figure 4. reverse leakage current versus junction temperature (typical values) 1.e-02 1.e-01 1.e+00 1.e+01 1.e+02 1.e+03 0 20406080100 i (a) r v (v) r t =25c j t =125c j t =100c j t =75c j t =50c j t =150c j 1.e-03 1.e-02 1.e-01 1.e+00 1.e+01 1.e+02 1.e+03 0 25 50 75 100 125 150 i (a) r t (c) j v =50v r figure 5. junction capacitance versus reverse applied voltage (typical values) figure 6. forward voltage drop versus forward current (typical values) 0.1 1.0 10.0 1.0 10.0 100.0 c(pf) v (v) r f=1mhz v =30mv t =25c osc rms j 1.e-04 1.e-03 1.e-02 1.e-01 1.e+00 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 i (a) fm v (v) fm t =75c j t =-40c j
characteristics bat41 4/12 doc id 12633 rev 2 figure 11. thermal resistance junction to ambient versus copper surface under each lead figure 7. forward voltage drop versus forward current (typical values) figure 8. variation of thermal impedance junction to ambient versus pulse duration 1.e-04 1.e-03 1.e-02 1.e-01 1.e+00 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 i (a) fm v (v) fm t =25c j t =100c j t =125c j 10 100 1000 1.e-02 1.e-01 1.e+00 1.e+01 1.e+02 z (c/w) th(j-a) single pulse t (s) p sot323-6l printed circuit board, epoxy fr4, e = 35 m, sot323-6l cu figure 9. relative variation of thermal impedance junction to ambient versus pulse duration figure 10. relative variation of thermal impedance junction to ambient versus pulse duration 0.01 0.10 1.00 1.e-02 1.e-01 1.e+00 1.e+01 1.e+02 z/r th(j-a) th(j-a) t (s) p sot-23 alumine substrate 10 x 8 x 0.5 mm sod-323 epoxy fr4 s = 2.25 mm e = 35 m cu 2 cu single pulse printed circuit board, epoxy fr4, e = 35 m, sod-323 cu allumine substrate, sot-23 0.01 0.10 1.00 1.e-03 1.e-02 1.e-01 1.e+00 1.e+01 z/r th(j-a) th(j-a) t (s) p sod-523 epoxy fr4 e = 35 m cu sot-666 epoxy fr4 e = 35 m cu single pulse printed circuit board, epoxy fr4, e = 35 m, sot-666 and sod-523 cu 300 350 400 450 500 550 600 0 5 10 15 20 25 30 35 40 45 50 s (mm2) cu r (c/w) th(j-a) printed circuit board, epoxy fr4, e = 35 m, sod-323 cu
bat41 ordering information scheme doc id 12633 rev 2 5/12 2 ordering information scheme figure 12. ordering information scheme bat41 xx xx film signal schottky diodes package v = 100 v rrm no letter = single diode a = common anode c = common cathode s = series diodes 07 = parallel diodes 09 = opposite diodes j = sod-323 w = sot-323 k = sod-523 p6 = sot-666 z = sod-123 configuration packing film = tape and reel
package information bat41 6/12 doc id 12633 rev 2 3 package information epoxy meets ul94, v0 lead-free packages in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark. figure 13. sod-123 footprint (dimensions in mm) table 6. sod-123 dimensions ref. dimensions millimeters inches min. max. min. max. a 1.45 0.057 a1 0 0.1 0 0.004 a2 0.85 1.35 0.033 0.053 b 0.55 typ. 0.022 typ. c 0.15 typ. 0.039 typ. d 2.55 2.85 0.1 0.112 e 1.4 1.7 0.055 0.067 g0.25 0.01 h 3.55 3.95 0.14 0.156 h b d e a1 a2 a g c 4.45 0.65 2.51 0.97 0.97
bat41 package information doc id 12633 rev 2 7/12 figure 14. sod-323 footprint (dimensions in mm) table 7. sod-323 dimensions ref. dimensions millimeters inches min. max. min. max. a 1.17 0.046 a1 0 0.1 0 0.004 b 0.25 0.44 0.01 0.017 c 0.1 0.25 0.004 0.01 d 1.52 1.8 0.06 0.071 e 1.11 1.45 0.044 0.057 h 2.3 2.7 0.09 0.106 l 0.1 0.46 0.004 0.02 q1 0.1 0.41 0.004 0.016 h b d e a1 a l q1 c 3.20 0.54 1.08 1.06 1.06
package information bat41 8/12 doc id 12633 rev 2 figure 15. sod-523 footprint (dimensions in mm) table 8. sod-523 dimensions ref. dimensions millimeters inches min. typ. max. min. typ. max. a 0.50 0.60 0.70 0.020 0.024 0.028 e 1.50 1.60 1.70 0.059 0.063 0.067 e1 1.10 1.20 1.30 0.043 0.047 0.051 d 0.70 0.80 0.90 0.028 0.031 0.035 b 0.25 0.35 0.010 0.014 c 0.07 0.20 0.003 0.008 l 0.15 0.20 0.25 0.006 0.008 0.010 l1 0.05 0.20 0.002 0.008 e1 2xb seating plane r0.1 c 8 7 l d e 0.15 0.20 c c a a b b b a c a l1 m m 0.7 0.3 2
bat41 package information doc id 12633 rev 2 9/12 figure 16. sot-323 footprint (dimensions in mm) table 9. sot-323 dimensions ref. dimensions millimeters inches min. typ. max. min. typ. max. a 0.8 1.1 0.031 0.043 a1 0.0 0.1 0.0 0.004 b 0.25 0.4 0.010 0.016 c 0.1 0.26 0.004 0.010 d 1.8 2.0 2.2 0.071 0.079 0.086 e 1.15 1.25 1.35 0.045 0.049 0.053 e 0.65 0.026 h 1.8 2.1 2.4 0.071 0.083 0.094 l 0.1 0.2 0.3 0.004 0.008 0.012 q 0 30 0 30 a1 a l h c b e d e 0.95 1.0 2.9 0.50 0.8
package information bat41 10/12 doc id 12633 rev 2 figure 17. sot-666 footprint (dimensions in mm) table 10. sot-666 dimensions ref. dimensions millimeters inches min. typ. max. min. typ. max. a 0.45 0.60 0.018 0.024 a3 0.08 0.18 0.003 0.007 b 0.17 0.34 0.007 0.013 b1 0.19 0.27 0.34 0.007 0.011 0.013 d 1.50 1.70 0.059 0.067 e 1.50 1.70 0.059 0.067 e1 1.10 1.30 0.043 0.051 e0.50 0.020 l1 0.19 0.007 l2 0.10 0.30 0.004 0.012 l3 0.10 0.004 d b l3 l1 e b1 e1 l2 e a a3 0.50 2.60 0.62 0.30 0.99
bat41 ordering information doc id 12633 rev 2 11/12 4 ordering information 5 revision history table 11. ordering information order code marking package weight base qty delivery mode bat41zfilm z41 sod-123 single 10 mg 3000 tape and reel bat41wfilm b41 sot-323 single 6 mg 3000 tape and reel bat41swfilm s41 sot-323 series 6 mg 3000 tape and reel bat41cwfilm c41 sot-323 common cathode 6 mg 3000 tape and reel bat41awfilm a41 sot-323 common anode 6 mg 3000 tape and reel bat41jfilm 41 sod-323 single 5 mg 3000 tape and reel BAT41KFILM 41 sod-523 single 1.4 mg 3000 tape and reel bat41-09p6film q1 sot-666 opposite 2.9 mg 3000 tape and reel bat41-07p6film p1 sot-666 parallel 2.9 mg 3000 tape and reel table 12. document revision history date revision changes 08-aug-2006 1 initial release. 12-oct-2009 2 updated table 8 q uote ?l1? from 0.10 to 0.05.
bat41 12/12 doc id 12633 rev 2 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by an authorized st representative, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2009 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com

▲Up To Search▲

Price & Availability of BAT41KFILM

	To Download BAT41KFILM Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .